Suppose we are going to install a driver on the 64-bit system. To edit it, open cfadisk.inf in any text editor. We need the sections cfadiskdevice and cfadiskdevice.NTamd64. cfadiskdevice%Microdrivedevdesc% = cfadiskinstall,IDE DiskTS64GCF40020101008 cfadiskdevice.NTamd64. Windows Driver Installer Setup Program (For PL2303 HXD, SA, TA, TB, RA GC, GS, GT, GL, GE, GD, GR versions)Installer version & Build date: 2.0.6 (2021-05-13) Windows Vista/7/8.1/10 (32 & 64-bit) WDF WHQL Driver: v3.8.39.0 / v5.1.0.0. Hence the USB drivers that ship with VCDS do not emulate a serial COM port and cannot be used with applications that expect to communicate via a serial port. NOTE: The following applies to our legacy USB interfaces (HEX-USB, KII-USB and HEX-USB+CAN). It does NOT apply to our current HEX-V2 or HEX-NET interfaces.
Cfadisk Usb Driver X64 Windows 10
MetalDwarf
[H]ard|Gawd
Select 'Browse my computer for driver software' in the Update driver window and click 'Let me pick from a list of device drivers on my computer' in the next window that appears. Click 'Have Disk,' and select the 'cfadisk.ini' ( file you edited in Step 7), using the Browse button. Click 'Next' and then update the USB driver. Close the window. Usb Drivers For Windows 10 64 Bit free download - Windows 7 (Professional), nVidia Graphics Driver (Windows Vista 64-bit / Windows 7 64-bit / Windows 8 64-bit), Western Digital Disk Manager.
Cfadisk Usb Driver X64 Download
This is based off the Hitatchi Microdrive trick, but I found a 64 bit compiled version of the driver on some german site. I did not make this driver I just found it.
64 bit Driver here
http://uploaded.to/file/1nbepp7r
Instructions
Part A
First you need to find the name of your USB or SDHC device
run -> regedit -> navigate to:
HKEY_LOCAL_MACHINESYSTEMControlSet001EnumUSBSTOR
find the key that matches your device. Right click on the key and click 'copy key name'
My SDHC card plugged into a laptop card reader looks like 'USBSTOREDisk&Ven_Multiple&Prod_Card__Reader&Rev_1.00'
Part B
unzip the files above and open cfadisk.inf in notepad.
scroll down to the section [cfadisk_device] you will see the line
%Microdrive_devdesc% = cfadisk_install,IDEDiskTS64GCF400______________________________20101008
delete everything after the comma so you are left with
%Microdrive_devdesc% = cfadisk_install,
paste your device string starting from USBSTOR*whatever* into the line just after the comma, no spaces.
you should have something that looks like this
%Microdrive_devdesc% = cfadisk_install,USBSTORDisk&Ven_Multiple&Prod_Card__Reader&Rev_1.00
repeat this process for the section immediately below called
[cfadisk_device.NTamd64]
If you are so inclined you can name your device at the bottom of the file by editing the text in the quotes in the last line after it says
Microdrive_devdesc = 'your device name here'
save the file, you now have a functioning driver.
Part C
You now need to install the driver
Open Device Manager, find your device and chose to update driver.
Tell windows you want to choose your own driver. Point it at your newly saved file.
Windows will bitch and complain that the file is not signed, and not a compatible driver. Proceed anyways.
Once installed you should see the USB device show up as a 'Disk Drive'
Reboot
Note: When I rebooted the first time, windows would not load, this was due to the driver being unsigned. When booting hit F8 to enter the bootloader, and choose to disable driver signing. Alternatively you can disable driver signing by doing the following:
run->cmd.exe
Now type the following
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
press Enter:
bcdedit.exe -set TESTSIGNING ON
press Enter:
When you reboot, you should find your USB or SDHC device listed as a fixed disk. You can now partition, make it a dynamic disk, install picky programs that wont run on a removable disk etc.